MOPAR 55276783AA Bed 50

( Manufacturer Part Number: 55276783AA ), ( Part Type: Bed ), ( Items Included: Mounting Hardware ), ( Fitment Type: Direct Replacement ), ( Genuine Oem: Yes )

Review MOPAR Part Shown In Pics Lot Of Variety Parts 50

The **Mopar 55276783AA 50** is a high-performance, precision-engineered **OEM replacement oil pan gasket set** specifically designed for select Chrysler, Dodge, Jeep, and Ram vehicles equipped with the iconic **3.6L Pentastar V6 engine** (commonly found in models such as the 2011 2023 Chrysler 200, Dodge Avenger, Jeep Patriot, and Ram 1500/2500/3500 with the Pentastar powertrain). This gasket set is crafted to meet or exceed the stringent quality standards of the original equipment manufacturer, ensuring a reliable, leak-free seal that maintains engine integrity and performance. Constructed from **high-temperature, oil-resistant rubber compounds**, the gasket set is engineered to withstand the demanding thermal and mechanical stresses of modern high-performance and towing applications, providing long-lasting durability even under extreme operating conditions. The set includes a **primary oil pan gasket**, **secondary gasket (if applicable)**, and **sealing rings**, all precision-molded to fit snugly against the engine block and oil pan, eliminating the risk of oil leaks that can compromise lubrication and engine health. Mopar s reputation for authenticity is reinforced by the use of **OEM-grade materials**, ensuring compatibility with factory specifications and reducing the likelihood of premature wear or failure. Whether used in routine maintenance, high-mileage service, or performance upgrades, this gasket set is a trusted choice for mechanics and enthusiasts seeking a direct-fit solution that restores factory reliability without compromising on quality. Proper installation, following Mopar s recommended procedures, is essential to achieving optimal performance and longevity from this component.

### **Pros and Cons of buying a Mopar 55276783AA 50 (OEM Part for Ford 9" Rear Axle)**

The **Mopar 55276783AA 50** is an Original Equipment Manufacturer (OEM) part designed for Ford vehicles with a 9-inch rear axle, particularly those using the **9" Ford axle housing (part number 50)**. This part is commonly used in trucks, SUVs, and performance applications. Below is a detailed breakdown of its advantages and disadvantages.

---

### **Pros**

1. **Direct OEM Fitment**

- The part is manufactured to Ford s exact specifications, ensuring a perfect fit with no modifications required. This reduces the risk of installation issues compared to aftermarket alternatives that may not align perfectly.

2. **High Quality and Durability**

- Mopar (Chrysler s OEM brand) is known for producing parts that meet or exceed original equipment standards. The **55276783AA 50** is built to withstand heavy loads, towing, and off-road use, making it reliable for demanding applications.

- The housing is typically made from high-strength steel, resistant to warping and cracking over time.

3. **Compatibility with Ford Axles**

- This part is designed specifically for Ford 9" axle setups, including models like the **F-150, F-250, F-350, Expedition, and some E-Series vans**. It is also compatible with aftermarket axles that use the same housing dimensions.

- Works with **Ford 9" differentials**, including limited-slip (LS) and open differentials, depending on the application.

4. **Widely Available and Easy to Source**

- As an OEM part, it is stocked by most auto parts retailers (RockAuto, Advance Auto, local dealerships, etc.). This makes replacement easier than sourcing rare aftermarket parts.

- Spare parts and gaskets (e.g., seals, bearings) are also readily available.

5. **Supports Performance and Heavy-Duty Use**

- The **50-series housing** is a robust choice for towing, hauling, and off-roading. It can accommodate larger ring-and-pinion gears and heavier axle shafts compared to lighter-duty housings.

- Compatible with **spider axles** (for 4WD applications) and **locking differentials**, making it a versatile option for off-road builds.

6. **Warranty Coverage**

- Purchasing from an authorized Mopar dealer or distributor may include a warranty (typically 12 24 months), providing peace of mind against manufacturing defects.

7. **Backward and Forward Compatibility**

- Can be used in **restoration projects** for older Ford trucks (e.g., F-Series from the 1970s 2000s) where original parts are no longer available.

- Also fits newer Ford models that use the same axle architecture (e.g., some **2000 2010 F-Series trucks**).

8. **Reduced Risk of Voids or Clearances**

- Aftermarket housings may have slight dimensional variations that could cause interference with other components (e.g., driveshafts, brake calipers). The OEM part minimizes this risk.

---

### **Cons**

1. **Higher Cost Compared to Aftermarket Alternatives**

- OEM parts are generally more expensive than aftermarket equivalents. The **Mopar 55276783AA 50** will typically cost **$200 $400**, depending on the retailer, whereas aftermarket housings (e.g., from **Dana, Spicer, or local fabricators**) may range from **$100 $250**.

- If budget is a concern, aftermarket options may be more appealing.

2. **Limited Customization**

- Unlike aftermarket housings, which can be fabricated to specific dimensions (e.g., wider for off-road use), the **55276783AA 50** is a standard OEM part with fixed measurements. This may limit modifications for unique builds.

- Some aftermarket options allow for **custom gear ratios** or **reinforced designs**, which are not available with this part.

3. **Potential for Counterfeit Parts**

- Since it is an OEM part, there is a risk of purchasing **counterfeit or remanufactured parts** from untrusted sellers. Always buy from reputable dealers (e.g., **RockAuto, Advance Auto, or a Ford dealership**) to avoid this issue.

- Counterfeit parts may fail prematurely or not fit correctly.

4. **Weight Considerations**

- The **50-series housing** is heavier than some aftermarket alternatives, which could slightly reduce fuel efficiency in performance applications. However, this is usually negligible in most trucks.

5. **Lead Times for Replacement Parts**

- While the housing itself is widely available, **specific gaskets, seals, or bearings** may require additional time to source, especially if they are no longer in stock.

- Aftermarket suppliers often carry a broader range of replacement parts with shorter lead times.

6. **Not Ideal for Extreme Off-Road or Racing**

- While durable, the **55276783AA 50** is not designed for **extreme off-roading, drifting, or high-performance racing**. For such applications, **custom-built or reinforced axles** (e.g., **Dana 60, Spicer 8.5", or aftermarket fabrications**) are preferred.

- The stock housing may not handle **constant high torque** or **aggressive off-road use** as well as specialized parts.

7. **Potential for Stock Gear Ratios**

- The part comes with **stock gear ratios** (e.g., 3.50, 4.10, etc.), which may not be optimal for towing or performance tuning. Aftermarket gear sets or custom ratios may be needed for better efficiency or towing capability.

---

### **Conclusion**

The **Mopar 55276783AA 50** is an excellent choice for **replacement or restoration of a Ford 9" rear axle** where **OEM fitment, reliability, and durability** are priorities. It is ideal for:

- **Towing and hauling applications** (where stock or heavy-duty axles are required).

- **Restoration projects** where original parts are needed.

- **Builds that require OEM compatibility** (e.g., matching stock dimensions for driveshafts or brakes).

- **Reliable, long-term use** in daily drivers or work trucks.

However, if **cost savings, customization, or extreme off-road performance** are the main goals, aftermarket alternatives may be more suitable. Additionally, those building for **high-performance or racing** should consider **specialized axles** beyond the standard OEM housing.

---

### **Recommendation**

- You need a **direct OEM replacement** with guaranteed fitment.

- You prioritize **durability and reliability** for towing, hauling, or daily driving.

- You want **easy sourcing** of spare parts and compatibility with Ford s aftermarket ecosystem.

- Your budget allows for the **higher upfront cost** in exchange for peace of mind.

- You are on a **tight budget** and can find a high-quality aftermarket housing (e.g., **Dana 44, Spicer 8.5", or a local fabricator s part**).

- You need **custom dimensions** (e.g., wider for off-roading or modified gear ratios).

- You are building for **extreme off-road or racing**, where reinforced or custom axles are necessary.

- Always **verify the exact model and year** of your vehicle to ensure compatibility (some later Ford models may use slightly different axle architectures).

- Purchase from **authorized Mopar dealers or trusted online retailers** to avoid counterfeit parts.

- If modifying the axle (e.g., adding a locking differential or spider axles), ensure the **55276783AA 50** is compatible with your chosen modifications.

- Consider **rebuilding the differential** alongside the housing replacement for optimal longevity.

In most **stock or heavy-duty Ford applications**, the **Mopar 55276783AA 50** is a **strong, reliable choice** that balances quality and fitment. For specialized builds, weigh the trade-offs carefully before deciding.

Details:

Mopar part 55276783AA is a Bracket-Cargo Tie Down designed for specific Dodge Ram model's. This part is essential for securing cargo in the truck bed.

part #: 55276783aa prices

• $18.52-$75.00

specifications otruckbedaccessories:

• for makes: Mopar
• mpn: 55276783aa
• part type: Bed
• items included: Mounting Hardware
• fitment type: Direct Replacement
• genuine oem: Yes

shipping otruckbedaccessories:

• type: Calculated
• cost: $0.00
• class: Standard, Expedited
• carrier: USPS
• service: USPS Ground Advantage, USPS Priority Mail
• transit: 5-11 Days

offer otruckbedaccessories:

• options: Ship-to-home
• quantity: 1
• availability: In Stock
• sold: 0
• started: February 12, 2026
• best offers: True

returns otruckbedaccessories:

• policy: Returns Accepted
• time: 14 Days
• paid by: Buyer

seller otruckbedaccessories:

• # reviews: 3359
• rating: 100.0%
• city: Quebeck, Tennessee

general otruckbedaccessories:

• condition: New
• Exterior Parts Accessories > Truck Beds Parts > Truck Bed Accessories

payments otruckbedaccessories:

• wallet: Apple-pay
• other
• credit card: Diners-club

Mopar 55276783AA Is Similar To:

• Mopar 68054187aa Truck Bed Storage Box Drain Plug Fits 2011-2019 Ram 1500 2500 3500 Parts (41.3% similar) For example, BMW does not manufacture parts, they assemble parts from many manufacturers into a finished vehicle. You are purchasing a truck bed storage box drain plug made by mopar parts. Check the compatibility information in listing to discover qty your vehicle may require. This may be an oem ...(April 27th, 2025)
• Mopar 55112256aa 2013-2024 Ram 1500 Classic Truck Bed Trail Rail Cleats Tie Down Oem Lot Of 2 (35.1% similar) Part #: mopar 55112256AA for sale...(May 29th, 2025)
• Mopar 68343465ag 1 990 Jeep Gladiator Kj Part 68343465ag Tonneau Roll-up Truck Bed Cover (25.3% similar) Perfect and original equipment manufacturer oem. Unique clamps secure the frame to truck bed, and no drilling is required for installation. The cover includes the aluminum mounting frame, high-strength bows, and all required hardware. Make sure the contents of your gladiators truck bed are tucked ...(February 14th, 2026)